--- configure.orig	2020-04-28 16:49:25 UTC
+++ configure
@@ -408,7 +408,7 @@ LDFLAGS_SHARED="-shared"
 modules="no"
 module_upgrades="no"
 prefix="/usr/local"
-mandir="\${prefix}/share/man"
+mandir="\${prefix}/man"
 datadir="\${prefix}/share"
 firmwarepath="\${prefix}/share/qemu-firmware"
 qemu_docdir="\${prefix}/share/doc/qemu"
@@ -493,6 +493,9 @@ numa=""
 tcmalloc="no"
 jemalloc="no"
 replication="yes"
+pcap="no"
+pcap_create="no"
+bpf="no"
 vxhs=""
 bochs="yes"
 cloop="yes"
@@ -1168,6 +1171,10 @@ for opt do
   ;;
   --enable-vnc-png) vnc_png="yes"
   ;;
+  --enable-pcap) pcap="yes"
+  ;;
+  --disable-pcap) pcap="no"
+  ;;
   --disable-slirp) slirp="no"
   ;;
   --enable-slirp=git) slirp="git"
@@ -3137,6 +3144,14 @@ if ! check_include "ifaddrs.h" ; then
 fi
 
 ##########################################
+# getifaddrs (for tests/test-io-channel-socket )
+
+have_ifaddrs_h=yes
+if ! check_include "ifaddrs.h" ; then
+  have_ifaddrs_h=no
+fi
+
+##########################################
 # VTE probe
 
 if test "$vte" != "no"; then
@@ -3806,7 +3821,7 @@ for i in $glib_modules; do
         glib_libs=$($pkg_config --libs $i)
         QEMU_CFLAGS="$glib_cflags $QEMU_CFLAGS"
         LIBS="$glib_libs $LIBS"
-        libs_qga="$glib_libs $libs_qga"
+        libs_qga="$glib_libs -lintl $libs_qga"
     else
         error_exit "glib-$glib_req_ver $i is required to compile QEMU"
     fi
@@ -4957,14 +4972,6 @@ if test "$docs" != "no" ; then
   fi
   if has makeinfo && has pod2man && test "$sphinx_ok" = "yes"; then
     docs=yes
-  else
-    if test "$docs" = "yes" ; then
-      if has $sphinx_build && test "$sphinx_ok" != "yes"; then
-        echo "Warning: $sphinx_build exists but it is either too old or uses too old a Python version" >&2
-      fi
-      feature_not_found "docs" "Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx"
-    fi
-    docs=no
   fi
 fi
 
@@ -5098,7 +5105,7 @@ fi
 
 # check for libusb
 if test "$libusb" != "no" ; then
-    if $pkg_config --atleast-version=1.0.13 libusb-1.0; then
+    if $pkg_config libusb-1.0; then
         libusb="yes"
         libusb_cflags=$($pkg_config --cflags libusb-1.0)
         libusb_libs=$($pkg_config --libs libusb-1.0)
@@ -5501,7 +5508,51 @@ if test "$debug_stack_usage" = "yes"; then
   fi
 fi
 
+##########################################
+# pcap probe
 
+if test "$pcap" = "yes" -a "$pcap" != "no"; then
+  cat > $TMPC << EOF
+#include <pcap.h>
+int main(void) { return (pcap_lib_version() == (char *)0 ? 1 : 0); }
+EOF
+  if test "$mingw32" = "no" ; then
+    libpcap=-lpcap
+  else
+    libpcap=-lwpcap
+  fi
+  if compile_prog "" "$libpcap" ; then
+    :
+  else
+    echo
+    echo "Error: Could not find pcap"
+    echo "Make sure to have the pcap libs and headers installed."
+    echo
+    exit 1
+  fi
+  cat > $TMPC << EOF
+#include <pcap.h>
+int main(void)
+{
+  char errbuf[PCAP_ERRBUF_SIZE];
+  return (pcap_create("foo", errbuf) == (pcap_t *)0 ? 1 : 0);
+}
+EOF
+  if compile_prog "" "$libpcap" ; then
+    pcap_create="yes"
+  fi
+  cat > $TMPC << EOF
+#define PCAP_DONT_INCLUDE_PCAP_BPF_H
+#include <pcap.h>
+#include <net/bpf.h>
+int main(void) { return (BPF_MAJOR_VERSION); }
+EOF
+  if compile_prog ; then
+    bpf="yes"
+  fi
+  libs_softmmu="$libpcap $libs_softmmu"
+fi # test "$pcap"
+
 ##########################################
 # check if we have open_by_handle_at
 
@@ -6627,6 +6678,7 @@ echo "Audio drivers     $audio_drv_list"
 echo "Block whitelist (rw) $block_drv_rw_whitelist"
 echo "Block whitelist (ro) $block_drv_ro_whitelist"
 echo "VirtFS support    $virtfs"
+echo "pcap support      $pcap"
 echo "Multipath support $mpath"
 echo "VNC support       $vnc"
 if test "$vnc" = "yes" ; then
@@ -6864,6 +6916,15 @@ fi
 if test "$want_tools" = "yes" ; then
   echo "CONFIG_TOOLS=y" >> $config_host_mak
 fi
+if test "$pcap" = "yes" ; then
+  echo "CONFIG_PCAP=y" >> $config_host_mak
+  if test "$pcap_create" = "yes" ; then
+    echo "CONFIG_PCAP_CREATE=y" >> $config_host_mak
+  fi
+  if test "$bpf" = "yes" ; then
+    echo "CONFIG_BPF=y" >> $config_host_mak
+  fi
+fi
 if test "$slirp" != "no"; then
   echo "CONFIG_SLIRP=y" >> $config_host_mak
   echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
@@ -7120,6 +7181,9 @@ fi
 # if this macro is set.
 if test "$have_fsxattr" = "yes" ; then
     echo "HAVE_FSXATTR=y" >> $config_host_mak
+fi
+if test "$have_ifaddrs_h" = "yes" ; then
+    echo "HAVE_IFADDRS_H=y" >> $config_host_mak
 fi
 if test "$have_copy_file_range" = "yes" ; then
     echo "HAVE_COPY_FILE_RANGE=y" >> $config_host_mak