--- dox/netpipe.1.orig 2007-05-11 01:29:09.000000000 +0900 +++ dox/netpipe.1 2008-04-15 00:24:20.000000000 +0900 @@ -26,7 +26,7 @@ .IB E valuator .SH SYNOPSIS -.B NPtcp +.B "NPtcp|NPtcp6" [\c .BI \-h \ receiver_hostname\fR\c ] @@ -124,9 +124,9 @@ -.SH TESTING TCP +.SH TESTING TCP/TCP6 .PP -NPtcp can now be launched in two ways, by manually starting NPtcp on +NPtcp can now be launched in two ways, by manually starting NPtcp or NPtcp6 on both systems or by using a nplaunch script. To manually start NPtcp, the NetPIPE receiver must be started first on the remote system using the command: @@ -147,7 +147,9 @@ Any options used must be the same on both sides. The \-P parameter can be used to override the default port number. This is helpful when running several streams through a router to a single endpoint. - +.PP +The NPtcp6 program is launched in a similar manner. +.PP The nplaunch script uses ssh to launch the remote receiver before starting the local transmitter. To use rsh, simply change the nplaunch script. @@ -376,6 +378,11 @@ .ne 3 .TP +.BI \-P \ \fIport\fR +Set the port number used by the TCP and TCP6 tests to \fIport\fR. +.ne 3 + +.TP .B \-r This option resets the TCP sockets after every test (TCP module only). It is necessary for some streaming tests to get good measurements